BCS-VD2W1

  • Availability: Produkt wycofany z oferty

BCS-PAN1202S-2W

Video doorphone set made in 2-wire technology without polarity. It consists of a monitor with a 7 "diagonal touch screen, an external stainless steel panel, a flush-mounted housing, a 24V power supply and an IP adapter, allowing the system to be connected to a LAN network and extended with CCTV components. for additional external panels and monitors.

The main advantage is the ability to implement existing systems (also analgic), where due to the lack of network cabling (UTP Cat.5e) there is no possibility of using the IP video doorphone. In this case, the 2-wire system gives the possibility to extend the functionality with functions available in the BCS IP video door station by means of the BCS-ADIP adapter. Communication between the adapter and monitor / panel is via a 2-wire bus. After connecting the adapter to the LAN network, we can view additional IP cameras, record the image from the entry phone on the BCS Line series recorders that support IP channels and the ability to use the BCS Viewer Lite mobile application.

Characteristic - external panel BCS-PAN1202S-2W:

  • Silver-colored front, made of stainless steel
  • Camera CMOS color 1/3 "with automatic LED backlight
  • Supported resolution: WVGA
  • 2.8mm wide-angle lens, camera angle horizontally approx. 80 °, 64 ° vertical
  • Mechanical adjustment of camera angle in any direction by 15 degrees
  • Built-in Web service - management via a web browser (connection to the BCS-ADIP adapter system required)
  • Built-in relay (C, NO, NC), maximum load of the 24VDC 1A relay
  • Support for an additional relay using the BCS-MODKD2 relay module (available separately), the panel communicates with the module via RS485
  • Note: an additional 12VDC power supply is required for supplying the electric latch and the BCS-MODKD2 relay module
  • Exit button support
  • Built-in tamper contact that triggers an acoustic alarm when attempting to open the housing
  • One call button
  • Built-in voice prompts for easy operation
  • The possibility of recording an audio-video message for the tenant in the event of not collecting the call / uncovering the tenant
  • Power supply: 24 VDC from 2-wire bus
  • Flush / surface mounting (flush-mounted and surface-mounted box available separately)
  • Ability to operate using a mobile phone with BCS Viewer or BCS Viewer Lite via Wifi and GSM
  • The mobile application for Google Android is downloadable from Goole Play
  • The mobile application for Apple iOS is available for download from the App Store
  • Bus connection: 2 wires without polarity (additional wiring and 12VDC power supply is required for the electric strike / relay module)
  • Dimensions height / width / depth 140x129x32.2mm
  • Power consumption: standby max 1W, work max 10W
  • Operating environment -30 ° C ~ + 60 ° C; 10 - 90% RH
  • Weight 0.8kg
  • Degree of protection IP54
  • Video recording capability for all BCS Line recorders supporting IP channels, including: network and analog recorders and HDCVI recorders with the option of hybrids

Characteristic - video monitor BCS-MON7200W-2W:

  • White housing with silver finish
  • Menu language: Polish, English
  • Operating mode - hands-free
  • Touch capacitive screen with 7 "diagonal
  • Resolution 800 * 480
  • The monitor is managed via a graphical interface and 5 sensory quick selection buttons
  • Built-in relay output C, NO for any application, maximum load: 12VDC 50mA
  • The possibility of independent control of two relays in the external panel (applies to the panel with an additional relay module BCS-MODKD2)
  • Diagnostics - icons on the screen
  • Smooth adjustment of the conversation volume settings and the volume of the call signal
  • Time adjustment: conversation, preview, ringing, recording of AV messages, video recordings from the external panel camera
  • Access to the memory card slot from the outside (no card included, supported micro SD card, max 4GB)
  • Built-in list of tenants and a list of connections
  • Ability to save photos and recordings from external panel cameras
  • Possibility to save audio-video messages left by guests in the event of not answering the call / absence of the tenant (the function can be turned off)
  • The ability to automatically take pictures of callers
  • Alarm function enabling connection of up to 6 NO / NC sensors, division into zones, history of events
  • The DND function that allows you to mute the monitor for a set time
  • Screen cleaning function for 45s.
  • The ability to display the image from IP cameras (support for BCS LINE and POINT cameras and other manufacturers on Onvif, up to 32 cameras for each monitor)
  • Identification of external panels - an individual verbal description for each entry
  • Expandable to a maximum of 3 monitors (and 1 external panel)
  • Maximum number of monitors / external panels in the system: 4 (eg 2 monitors + 2 external panels)
  • Intercom audio function between monitors
  • Surface mounting
  • 24V power supply from a 2-wire bus
  • Connection: 3 inputs / outputs of a 2-wire bus
  • Dimensions 200x136x22mm (W x H x D)

Characteristic - adapter IP BCS-ADIP:

  • Adapter enabling connection of LAN to a 2-wire video intercom system, it is also a distributor of a 2-wire bus for connecting external panels and video monitor (no polarization)
  • 24V 2.5A power supply using the supplied BCS-ZA2425 power supply set
  • Connection: 4 outputs of a 2-wire bus for connecting external panels and monitors, 1 Ethernet port for connecting a LAN / computer network
  • Dimensions mm (W x H x D)
  • Mounted on DIN or surface rail
  • LED indicating the presence of power
  • Reset button

Characteristic - Power Supply BCS-ZA2425:

  • 24VDC output voltage
  • Output voltage regulation in the range of 20.5-26.2 V
  • Output current 2.5A
  • Input voltage range 180-240V AC 50-60 Hz
  • Double DC output
  • Short-circuit protection of the 24V output
  • Overload protection at the level of 5A
  • Thermal protection
  • Additional overvoltage protection for DC output and AC input
  • Built-in LED indicator for output voltage indication
  • Mounting on TS 35 or surface rail with an adapter
  • Intended for indoor installations
  • Operation LED indication
  • Automatic return after elimination of the short circuit (in the case of a short or long-term fault, the power supply must be restarted for 30 seconds)
  • 60W power
  • Efficiency> 90%
  • DIN 4 width
  • Dimensions 70 x 90 x 65 (W x H x D)

 

Download